I turned our water-stained wood dining table into a gorgeous piece that is
protected against food and liquid!
If you have a real wood piece of furniture that has stains from food and
drinks, this tutorial will help you bring it back to life. I’m SO pleased at
how this ended up!
We got our dining table years ago at a local store in Indy called Urban
Underpriced. I loved that it had a solid wood top, not just veneer. The wood
planks have all the knots and imperfections that I think gives furniture
Unfortunately, we quickly realized there was little to no protective coat on
the tabletop. At first it didn’t bother me much, but after five years the
stains were all over:
This post may contain affiliate links for
I may earn a small commission when you make a purchase through links.
We also had wine stains, oil marks and even some nail polish remover:
It was a mess!
I finally got to it a few weeks ago and the refinishing process went so
smoothly, I was kicking myself for waiting so long!
Why does a project go so easily when I think it will be time consuming, and
take forever when I think it will be a few minutes?? Every. time.
1. Sand down imperfections and water spots
Before sanding, I wiped down the table well. You want to make sure there’s
no residue on the surface that might gum up the sanding pad.
If you have any stuck food, use a putty knife to remove it before
cordless orbital sander
for this job — I’ve gone to battery-operated for almost all of my tools
now, and they make DIY so much easier!:
The orbital sander has a round sanding area that speeds up the
I used to have problems with these sanders leaving skip marks — it would
drive me crazy! After all that work, seeing those little
imperfections was so frustrating.
I figured out the cause of those skip marks were from pushing too hard on
the sander. If you let it do it’s job, the process is much quicker and
Here are some basic tips for using an orbital sander:
Start with a coarse grit sandpaper (I started with 80) and move to
finer one (120 grit) for your last pass.
Let the sander do the work! Do not press hard on it or you will get the
dreaded those skip marks. Let it glide across the surface, and only add
a bit more pressure on problem areas.
- Sand with the grain of the wood.
Place the sander on the surface and then turn it on. When you
start sanding while it’s running, you might damage the wood or get the
marks I was talking about.
Empty the dust collector often to keep the dust in the air to a
I was pleasantly surprised at how little dust settled nearby. I had to
wipe down a few things, but overall the collector attached to the sander
does a great job.
That oil mark pictured above took a few more passes than the rest of the
table, and I had to add a little pressure while working on that spot. I
like to tilt the sander just a bit so I can use the edge of the pad on
problem spots like this.
2. Clean your surface well after sanding
After sanding, you’ll want to do a good cleaning to remove all
of the dust before staining or treating the wood surface.
I vacuumed first, focusing on the grooves between the planks:
sticky surface grabs everything, but isn’t wet.
I didn’t have one handy, so I used a microfiber cloth instead:
If you’re planning to stain the wood, using a slightly damp rag is OK.
Getting the wood wet will open up the wood after sanding, which can help it
accept the stain a little better.
But I prefer not to use anything wet, because it can make the imperfections
pop up again. Sometimes it happens, sometimes it doesn’t…but on more
porous wood like this one I didn’t want to take a chance.
3. Choose your protectant
I wanted to keep the natural look of the wood so I wasn’t going to stain
this piece. This is how the table looked after the sanding and
I use polyurethane on surfaces that don’t get as much wear and tear — like
shelves or built ins. On tables and counters I much prefer the natural
finish and look of Tung oil. It gives you the durability of other varnishes,
but also really brings out the natural color of the wood.
Over the years, I’ve used both pure Tung oil and a “finish” version
that has some additives, and both hold up beautifully. Pure Tung oil has no
additives, but takes longer to dry.
There are SO many benefits of Tung oil:
- The finish doesn’t yellow or darken over time.
It gives a protective, natural sheen to the wood finish. I find glossy
polyurethanes show scratches and scrapes more.
Tung oil is eco-friendly and made with crushed seeds from Tung tree
Pure Tung oil is food safe and non toxic. You can use pure oil on
cutting boards, utensils or wood bowls. (Let it cure before using.)
- It’s easy to apply with just a soft cloth.
4. Applying Tung oil
I use a foam brush when applying polyurethane coats, but Tung oil is even
Just pour it on the surface and wipe it in with a lint free rag, with the
I recommend wearing gloves during the application!
Use a generous amount and wipe it into the wood. You’ll see the results
- Wait 10-15 minutes and then use a clean rag to wipe up any excess and buff the surface (rub the oil into the wood).
You can do a light sanding with a fine steel wool in between coats, but
if you prepped well, that isn’t necessary most of the time.
Dry times can vary based on the humidity and product you use.
Pure Tung oil
can take two to three days to dry, but Tung oil finishes that are a blend
only take 24 hours, sometimes less.
5. Add enough coats
The directions always call for numerous coats, but on some pieces I find
that’s not necessary. I only do one (maybe two) when I retouch our
island every year or so, and that holds up great.
More porous wood (large pores in the wood) like our table soaks in
whatever you apply, so more coats are necessary.
Our maple counters on the island aren’t as porous and take less coats.
I can tell just by looking if I need to add more after the first coat. Use
the light and look at the surface at an angle:
See the shinier parts? That’s where the finish covered well. The matte areas
are wood that absorbed the oil and still needs more coats.
In total I applied three coats and because I wasn’t using pure Tung
oil, it took less than a day to dry between coats.
The result is a water resistant table with a
gorgeous satin finish. Like most protective products, it
enhances the look of the wood:
My final coat was pretty darn smooth, but as a finishing touch I like to go
over it quickly with a piece of paper bag or kraft paper:
It’s amazing how just that paper will knock down the tiniest imperfections
and leave you with a perfectly smooth finish!
The best part is that the Tung oil doesn’t allow moisture to penetrate the
Our wood table is a richer tone now…you can really see the variations
and warmth of the wood:
We LOVE it!
All of the stains are gone and we now have a beautiful wood tabletop!
wood dining chairs
used to be the same lighter wood as the table, but I spray painted them
black a couple years ago. We love the contrast:
lower upholstered dining chairs, also from World Market. The cats kept playing on the taller chairs and
knocking them over. 🙂
The new chairs are SO comfy! I love the more causal look for this
Now the cats curl up together and cuddle in them instead of climbing all
over! 😉 Well…for the most part.
This refinishing tutorial will work for any wood furniture piece. It will
get rid of the water spots and prevent them from coming back!
Have you used Tung oil on any wood surfaces in your home?